文章由上海程斯智能科技有限公司提供技术咨询和服务
热湿交换过滤器综合性测试仪含压降过滤测试仪 ，泄漏，顺应性（Comprehensive Testing Instrument for Heat and Moisture Exchange Filters, Including Pressure Drop, Leakage, and Compliance）
执行标准：
HME热湿交换器主要用《YYT 0735.1-2009 麻醉和呼吸设备湿化人体呼吸气体的热湿交换器(HME)
Execution Standards:
The HME heat and moisture exchanger is mainly used for humidification of human respiratory gases in anesthesia and respiratory equipment according to YYT 0735.1-2009
技术参数：
控制系统：PLC;
操作界面：简体中文/英文,彩7寸触摸屏过滤测试仪 ，中英文切换；
压力输出范围：0kPa～100 kPa（可根据客户要求定制范围），可任意设定压力输出值，检定误差不大于读数的±1%过滤测试仪 。
测试持续时间：0.1秒～99.9分，误差不大于±0.1S过滤测试仪 。
产品净重：30kg；
测试项目：压降过滤测试仪 ，泄漏和顺应性；
储气罐：2L不锈钢制造；
流量计：0-200ml/min过滤测试仪 ，精度1.5%；
压力传感器：0-50Kpa 485通讯 精度0.1%；
接头：15和22mm；
外形尺寸：1000×480×450（mm）；
电源：AC90V-240V/50Hz（自适应宽电压）
整机功率：70W；
流量传感器：高精度传感器0-150L/min；
压差传感器：0-10V输出过滤测试仪 ，负1kpa-1Kpa；
使用管路:15mm(外径)X13.7mm(内径)的无缝铜管；
Technical Parameters:
Control system: PLC;
Operation interface: Simplified Chinese/English, 7-inch color touch screen, switching between Chinese and English;
Pressure ouut range: 0kPa~100 kPa (customizable range according to customer requirements), pressure ouut value can be set arbitrarily, and the calibration error is not greater than ± 1% of the reading.
Test duration: 0.1 seconds to 99.9 minutes, with an error not exceeding ± 0.1S.
Net weight of the product: 30kg;
Test items: pressure drop, leakage, and compliance;
Gas storage tank: Made of 2L stainless steel;
Flow meter: 0-200ml/min, accuracy 1.5%;
Pressure sensor: 0-50Kpa 485 communication accuracy 0.1%;
Connectors: 15 and 22mm;
Dimensions: 1000 × 480 × 450 (mm);
Power supply: AC90V-240V/50Hz (adaptive wide voltage)
Overall power: 70W;
Flow sensor: high-precision sensor 0-150L/min;
Differential pressure sensor: 0-10V ouut, negative 1kpa-1Kpa;
Pipeline used: seamless copper tube with an outer diameter of 15mm and an inner diameter of 13.7mm;
原理：
热湿交换过滤器综合性测试仪基于差压计和流量计的测量原理过滤测试仪 。在测量过程中，将被测过滤器安装在测试仪的测试段内，通过控制风机的转速和风向，使空气通过过滤器并产生一定的压降。测试仪通过差压计测量过滤器前后的压力差，同时通过流量计测量空气流量，进而根据这两个参数计算出过滤器的压降值。
Principle:
The comprehensive testing instrument for heat and moisture exchange filters is based on the measurement principles of differential pressure gauges and flow meters. During the measurement process, the tested filter is installed in the testing section of the tester, and the speed and direction of the fan are controlled to allow air to pass through the filter and generate a certain pressure drop. The tester measures the pressure difference before and after the filter through a differential pressure gauge, and measures the air flow rate through a flow meter. Based on these two parameters, the pressure drop value of the filter is calculated.
应用领域：
医疗器械生产：在医疗器械的生产过程中，综合性测试仪用于评估热湿交换过滤器的性能和质量，确保其在医疗设备中的表现符合标准过滤测试仪 。这对于麻醉和呼吸设备尤为重要，因为这些设备需要精确控制呼吸气体的湿度和温度，以提供舒适的呼吸体验并减少呼吸道干燥和不适。质量控制：在质量控制环节，综合性测试仪用于验证生产出的热湿交换过滤器是否达到设计要求。通过定期测试，可以确保大规模生产中的产品质量一致性，减少次品率。
研发：在研发阶段，测试仪帮助研究人员评估不同设计或材料的热湿交换过滤器的性能，优化产品设计，提高产品的市场竞争力过滤测试仪 。
临床应用：在临床应用中，综合性测试仪确保医疗设备在实际使用中的性能表现，保障患者的安全和舒适过滤测试仪 。特别是在重症监护和呼吸治疗中，测试仪的精确测量对于确保设备的有效性和患者的舒适度至关重要。
Application Areas:
Medical device production: In the production process of medical devices, comprehensive testers are used to evaluate the performance and quality of heat and moisture exchange filters, ensuring that their performance in medical equipment meets standards. This is particularly important for anesthesia and respiratory equipment, as these devices require precise control of the humidity and temperature of breathing gases to provide a comfortable breathing experience and reduce respiratory dryness and discomfort. Quality control: In the quality control process, a comprehensive tester is used to verify whether the produced heat and moisture exchange filters meet the design requirements. Regular testing can ensure consistent product quality in large-scale production and reduce the rate of defective products.
RD: During the RD phase, the tester helps researchers evaluate the performance of heat and moisture exchange filters with different designs or materials, optimize product design, and improve product market competitiveness.
Clinical lication: In clinical lications, comprehensive testing equipment ensures the performance of medical devices in actual use, ensuring the safety and comfort of patients. Especially in intensive care and respiratory therapy, precise measurement of the testing instrument is crucial to ensure the effectiveness of the equipment and patient comfort.
产品概述：
采用可编程控制器，触摸屏，压力传感器，加压装置，机载打印机等组成，中英文菜单显示，人机对话设定各项参数自动运行测试过滤测试仪 。生产单位，批次可任意输入，操作方便。
并采用密码，信息安全可靠过滤测试仪 。产品规格、测试压力值设定、保持时间设定，打印设定、测试、加压、减压、时间、标定，检定等。机载打印测试数据。实时显示测试加压值，保持时间等数据。并由打印机打印出测试数据及结果。适用于输液器、输血器、输液针、麻醉包过滤器、管路、导管、快速接头等。
Product Overview:
It is composed of a programmable controller, touch screen, pressure sensor, pressurization device, onboard printer, etc. The menu is displayed in both Chinese and English, and various parameters are automatically set through human-machine dialogue for testing. The production unit and batch can be input freely, making the operation convenient.
And adopt a three-level password, ensuring information security and reliability. Product specifications, testing pressure value setting, holding time setting, printing setting, testing, pressurization, depressurization, time, calibration, verification, etc. Airborne printing test data. Real time display of test pressure values, holding time, and other data. And the test data and results will be printed out by the printer. Suitable for infusion sets, blood transfusion sets, infusion needles, anesthesia bag filters, tubing, catheters, quick couplings, etc.
配置清单：
接头：2个
测压机构：内置
打印机：嵌入式微型打印机热敏
Configuration List:
Connectors: 2
Pressure measuring mechanism: built-in
Printer: Embedded micro printer with thermal sensitivity（Comprehensive Testing Instrument for Heat and Moisture Exchange Filters, Including Pressure Drop, Leakage, and Compliance）
执行标准：
HME热湿交换器主要用《YYT 0735.1-2009 麻醉和呼吸设备湿化人体呼吸气体的热湿交换器(HME)
Execution Standards:
The HME heat and moisture exchanger is mainly used for humidification of human respiratory gases in anesthesia and respiratory equipment according to YYT 0735.1-2009
技术参数：
控制系统：PLC;
操作界面：简体中文/英文,彩7寸触摸屏过滤测试仪 ，中英文切换；
压力输出范围：0kPa～100 kPa（可根据客户要求定制范围），可任意设定压力输出值，检定误差不大于读数的±1%过滤测试仪 。
测试持续时间：0.1秒～99.9分，误差不大于±0.1S过滤测试仪 。
产品净重：30kg；
测试项目：压降过滤测试仪 ，泄漏和顺应性；
储气罐：2L不锈钢制造；
流量计：0-200ml/min过滤测试仪 ，精度1.5%；
压力传感器：0-50Kpa 485通讯 精度0.1%；
接头：15和22mm；
外形尺寸：1000×480×450（mm）；
电源：AC90V-240V/50Hz（自适应宽电压）
整机功率：70W；
流量传感器：高精度传感器0-150L/min；
压差传感器：0-10V输出过滤测试仪 ，负1kpa-1Kpa；
使用管路:15mm(外径)X13.7mm(内径)的无缝铜管；
Technical Parameters:
Control system: PLC;
Operation interface: Simplified Chinese/English, 7-inch color touch screen, switching between Chinese and English;
Pressure ouut range: 0kPa~100 kPa (customizable range according to customer requirements), pressure ouut value can be set arbitrarily, and the calibration error is not greater than ± 1% of the reading.
Test duration: 0.1 seconds to 99.9 minutes, with an error not exceeding ± 0.1S.
Net weight of the product: 30kg;
Test items: pressure drop, leakage, and compliance;
Gas storage tank: Made of 2L stainless steel;
Flow meter: 0-200ml/min, accuracy 1.5%;
Pressure sensor: 0-50Kpa 485 communication accuracy 0.1%;
Connectors: 15 and 22mm;
Dimensions: 1000 × 480 × 450 (mm);
Power supply: AC90V-240V/50Hz (adaptive wide voltage)
Overall power: 70W;
Flow sensor: high-precision sensor 0-150L/min;
Differential pressure sensor: 0-10V ouut, negative 1kpa-1Kpa;
Pipeline used: seamless copper tube with an outer diameter of 15mm and an inner diameter of 13.7mm;
原理：
热湿交换过滤器综合性测试仪基于差压计和流量计的测量原理过滤测试仪 。在测量过程中，将被测过滤器安装在测试仪的测试段内，通过控制风机的转速和风向，使空气通过过滤器并产生一定的压降。测试仪通过差压计测量过滤器前后的压力差，同时通过流量计测量空气流量，进而根据这两个参数计算出过滤器的压降值。
Principle:
The comprehensive testing instrument for heat and moisture exchange filters is based on the measurement principles of differential pressure gauges and flow meters. During the measurement process, the tested filter is installed in the testing section of the tester, and the speed and direction of the fan are controlled to allow air to pass through the filter and generate a certain pressure drop. The tester measures the pressure difference before and after the filter through a differential pressure gauge, and measures the air flow rate through a flow meter. Based on these two parameters, the pressure drop value of the filter is calculated.
应用领域：
医疗器械生产：在医疗器械的生产过程中，综合性测试仪用于评估热湿交换过滤器的性能和质量，确保其在医疗设备中的表现符合标准过滤测试仪 。这对于麻醉和呼吸设备尤为重要，因为这些设备需要精确控制呼吸气体的湿度和温度，以提供舒适的呼吸体验并减少呼吸道干燥和不适。质量控制：在质量控制环节，综合性测试仪用于验证生产出的热湿交换过滤器是否达到设计要求。通过定期测试，可以确保大规模生产中的产品质量一致性，减少次品率。
研发：在研发阶段，测试仪帮助研究人员评估不同设计或材料的热湿交换过滤器的性能，优化产品设计，提高产品的市场竞争力过滤测试仪 。
临床应用：在临床应用中，综合性测试仪确保医疗设备在实际使用中的性能表现，保障患者的安全和舒适过滤测试仪 。特别是在重症监护和呼吸治疗中，测试仪的精确测量对于确保设备的有效性和患者的舒适度至关重要。
Application Areas:
Medical device production: In the production process of medical devices, comprehensive testers are used to evaluate the performance and quality of heat and moisture exchange filters, ensuring that their performance in medical equipment meets standards. This is particularly important for anesthesia and respiratory equipment, as these devices require precise control of the humidity and temperature of breathing gases to provide a comfortable breathing experience and reduce respiratory dryness and discomfort. Quality control: In the quality control process, a comprehensive tester is used to verify whether the produced heat and moisture exchange filters meet the design requirements. Regular testing can ensure consistent product quality in large-scale production and reduce the rate of defective products.
RD: During the RD phase, the tester helps researchers evaluate the performance of heat and moisture exchange filters with different designs or materials, optimize product design, and improve product market competitiveness.
Clinical lication: In clinical lications, comprehensive testing equipment ensures the performance of medical devices in actual use, ensuring the safety and comfort of patients. Especially in intensive care and respiratory therapy, precise measurement of the testing instrument is crucial to ensure the effectiveness of the equipment and patient comfort.
产品概述：
采用可编程控制器，触摸屏，压力传感器，加压装置，机载打印机等组成，中英文菜单显示，人机对话设定各项参数自动运行测试过滤测试仪 。生产单位，批次可任意输入，操作方便。
并采用密码，信息安全可靠过滤测试仪 。产品规格、测试压力值设定、保持时间设定，打印设定、测试、加压、减压、时间、标定，检定等。机载打印测试数据。实时显示测试加压值，保持时间等数据。并由打印机打印出测试数据及结果。适用于输液器、输血器、输液针、麻醉包过滤器、管路、导管、快速接头等。
Product Overview:
It is composed of a programmable controller, touch screen, pressure sensor, pressurization device, onboard printer, etc. The menu is displayed in both Chinese and English, and various parameters are automatically set through human-machine dialogue for testing. The production unit and batch can be input freely, making the operation convenient.
And adopt a three-level password, ensuring information security and reliability. Product specifications, testing pressure value setting, holding time setting, printing setting, testing, pressurization, depressurization, time, calibration, verification, etc. Airborne printing test data. Real time display of test pressure values, holding time, and other data. And the test data and results will be printed out by the printer. Suitable for infusion sets, blood transfusion sets, infusion needles, anesthesia bag filters, tubing, catheters, quick couplings, etc.
配置清单：
接头：2个
测压机构：内置
打印机：嵌入式微型打印机热敏
Configuration List:
Connectors: 2
Pressure measuring mechanism: built-in
Printer: Embedded micro printer with thermal sensitivity